80s Retro

16oz

🛠️ Step-by-Step Instructions:

1. Clean the Surface

• Wipe the item thoroughly with  a lint-free cloth to remove dust, oils, or residue.

• 2. Prepare the Transfer

• Your UV-DTF should have two layers:

  1. Top protective film

  2. Printed adhesive design

  3.  

3. Peel Off the Backing

• Carefully peel away backing sheet, leaving the printed design stuck to the clear adhesive film.

• Be gentle to ensure the entire design remains on the sticky layer.

4. Position the Transfer

• Line up your design on the surface exactly where you want it.

• Press it down firmly and evenly — once it sticks, you can't reposition it!

5. Press and Rub

• Use a squeegee, scraper, or your fingers to rub over the transfer.

• Apply firm pressure to bond the design to the surface — especially at edges and corners.

6. Peel Off the Top Film

• Slowly and carefully peel away the clear top layer.

• Your design should now be fully adhered to the item!

💡 Tips:

• Best for smooth, hard surfaces only.

• No heat or water needed.

• Hand wash items if possible; avoid dishwashers for long-lasting results.

• Store transfers flat, away from heat and moisture.